1997 REFRIGERATORS
GLOBAL NEW GENERATION
SxS
© General Electric Company 1997
26
Light Switch - electronic models
To remove the light switch -- first
remove the control console and dismount
the control housing. Then, disconnect
the wiring harness from the switch.
Compress the tabs at the end of the
switch and press it out of the control
housing.
To reinstall the light switch -- press
the switch terminals firmly into the
wiring harness connector. Align the
pin on the front of the switch with the
notch in the switch opening and press
the switch firmly to lock the tabs. Then,
remount the control housing and reinstall
the control console.
Power Module - electronic models
To remove the power module -- first
remove the control housing. Then,
remove the screw at the rear of the
power module. Pull the power module to
the rear to disengage the tab from the
slot in the control housing. Disconnect
the 11-pin connector from the power
module board.
To reinstall the power module -- dress
the ribbon cable through the opening in
the front of the control housing and
reconnect the 11-pin connector to the
power module board. Engage the tab
on the module housing and reinstall the
screw. Then, reinstall the control housing,
control console, pad support and pad.
