1997 REFRIGERATORS
GLOBAL NEW GENERATION
SxS
© General Electric Company 1997
24
that secure the water tubing nozzle to
the rear of the recess housing and pull
the nozzle out of the housing. Pull the
tubing out of the freezer door.
To reinstall the water tubing -- first,
insert the lower end of the tubing into
the conduit and feed it through the door
until it exits at the lower hinge thimble.
Then, insert the tubing nozzle through
rear of the recess assembly. Remount
the freezer door and reconnect the tubing
at the bottom of the door.
Recess Heater
To remove the recess heater -- first,
dismount the recess assembly. Then,
dismount the water tubing nozzle from the
rear of the recess housing. Cut the
orange and brown wires close to the
heater connections and peel the heater
foil from the top and rear of the recess
housing.
To install a new recess heater -- first,
peel the paper backing from the heater
foil. Then, carefully, position the foil
on the rear of the recess housing,
beginning at the hole for the water
tubing nozzle. Continue to press the
foil onto the rear and top of the recess
housing so that it makes good contact
along the entire length of the heater wire.
Reconnect the brown and orange wires to
the heater leads, using closed-end
connectors for the splices. Remount the
water tubing to the rear of the recess
housing. Remount the recess assembly.
