1997 REFRIGERATORS
GLOBAL NEW GENERATION
SxS
© General Electric Company 1997
20
the deflector until it is firmly seated.
Reinstall the pad switch actuator, control
housing, escutcheon, pad support and pad.
Ice Funnel
To remove the ice funnel-- first remove the
control housing. Using a small blade
screwdriver, release the funnel support
locking tabs that engage the control
housing. With all four tabs released,
withdraw the funnel and support from the
bottom of the control housing. Pull the
funnel off the support.
To reinstall the ice funne -- position it on the
funnel support, engaging all of the locator
pins into corresponding holes at the edges
of the funnel. Position the funnel and
support into control housing cavity and
press the support firmly to lock the tabs.
Dress the ice deflector flap below the rear
edge of the funnel. Reinstall the control
housing, escutcheon, pad support and pad.
Duct Door
To remove the duct door -- first remove
the control housing. Then, open the duct
door and disengage the cleats from the
duct door toward the rear. Swing the top
of the door down and pull it downward to
release the hooks from the end of the
crank.
To reinstall the duct door -- position it
in front of the crank with the hooks at
the top and the gasket surface toward the
front. Then, pull the duct door crank
forward and engage the hooks over the end
of the crank. Swing the door up and
engage the cleats onto the crank.
Reinstall the control housing,
escutcheon, pad support and pad.
Duct Door Crank
