Assembly and Setup
48
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
2097937-002 Rev G
11 March 2019
NOTE:
Do not plug any hardware, including the treadmill USB
cable, into the CardioSoft/CS PC until directed to do so.
1.
If necessary, turn on the CardioSoft/CS PC and log on when
prompted.
Refer to the
CardioSoft/CS Operator Manual
for logon
instructions.
2.
Locate the flash drive (PN 317-160-313) shipped with the
T2100-ST series treadmill and insert into a USB port of the
CardioSoft/CS PC.
3.
Browse the flash drive and locate the file named
CDM21218_Setup.exe and double-click it to start the
installation.
NOTE:
Do not download the driver from the FTDI website.
NOTE:
The following instructions are for a PC running
Windows 7. The basic instruction flow should be the
same for Windows 8 and 10, although the screens
may vary. If necessary, refer to Appendix B,
“Reference Documents”, for a list of reference
documents that contain helpful OS-specific guidance.
4.
If you receive the prompt “
Do you want to allow the
following program to make changes to this computer?
”,
verify the program name, CDM21218_Setup.exe, and
publisher, Future Technology Devices International Ltd,
and click
Yes
.
The
Driver Extract
window opens.
