– 55 –
Service Mode Test
Sequence
t14 Spin Test
Enter
Displays “estimated” and “current” rpm. Unit begins spinning at 410 rpm
Start
Ramps up to 1050 rpm
Start
Ramps up to 1150 rpm
Start
Ramps up to 1300 rpm
Power
Ramps down and returns to service mode screen
t15 Dispenser
Test
Enter
Displays “pre-wash” and dispenser moves to position 1
Start
Displays “main detergent” and dispenser moves to position 2
Start
Displays “bleach” and dispenser moves to position 4
Start
Displays “fabric softener” and dispenser moves to position 3
Start
Repeats above sequence, starting with “pre-wash”
Power
Drains and returns to service mode screen
t16 Bulk Pumps
Test
Enter
Displays “left detergent pump”; water fi lls and primes left detergent
Start
Displays “softener pump” and begins priming
Start
Displays “right det pump” and begins priming
Start
Continues cycling through the bulk pumps
Power
Drains and returns to service mode screen
t17 Bulk Sensors
Test
Enter
Displays the status of Left Detergent, Softener and Right Detergent
Power
Returns to service mode screen
t18 Auto Spin
Profi le
Enter
Slowly ramps up to 90, then 120, then 410
Power
Interrupts and returns to service mode screen
t19 Bulk Manual
Priming
Enter
Displays “prime left detergent,” “prime softener,” prime right detergent”
with one highlighted
Enter
Begins priming selected, with water on to rinse it from dispenser drawer
Power
Drains; then returns to service mode screen
t20 Bulk Primed
Status
Enter
Displays “left detergent pump,” “softener pump,” "right detergent pump”
with one highlighted
Enter
Displays “left det primed status”; choose status “yes” (lines primed) or
“no” (lines not primed)
Enter
Returns back to “Bulk Primed Status”
Power
Returns to service mode screen
