17
4. The camera/terminal will redisplay with the new
information.
5. Pressing the enter key will terminate the camera/terminal
IP set-up and return you to the previous menu.
Figure 9. The camera/terminal IP table
Option #3 lets you enable/disable the
Use IP for Camera
command. When set to
Enabled
the PBe will search the
incoming UDP and TCP packets for a match of IP addresses.
Depending on the
Device
setting the PBe will parse the data
received in that packet and send it to the associated camera
number.
The Monitor Mode menu
The fourth selection on the
Main Menu
is the
Monitor Mode
on/
off toggle. This selection will toggle between off and on when 4
