13
Figure 4. Laptop connected to PBe
4. The
Connection Description
dialog box will display.
Type in a name for this session (PBe) and click
OK
.
5. The
Connect To
dialog box display. Select the COM port
you are connected to in the
Connect Using
drop-down
list.
6. The
COMx Properties
dialog box will display. Select the
following settings to complete the HyperTerminal setup:
•
Bits per second = 57600
•
Data bits = 8
•
Parity = none
•
Stop bits = 1
•
Flow control = none
7. Click
OK
.
To program the PBe do the following:
1. Power up the PBe by plugging in the power supply. The
window shown in
Figure 5
will appear confirming that
you are in HyperTerminal programming mode.
