GE PKW7000 Series, Owner'S Manual & Installation Instructions

Page: 9 / 40

49-2000658 Rev. 0
9
Cleaning The Warming Drawer
Be sure the controls are in the OFF position and all surfaces are cool before cleaning any part of the warming drawer.
Painted Or Enameled Surfaces
Use soap and warm water to thoroughly clean.
CARE AND
CLEANING:
Cleaning
The
W
arming
Drawer
Rack
Clean the rack with detergent and water. After cleaning,
rinse the rack with clean water and dry with a clean cloth.
Control Knob
The control knob may be removed for easier cleaning.
Make sure the knob is in the PROOF position and pull it
straight off the stem for cleaning.
The knob can be cleaned in a dishwasher or it may also
be washed with soap and water. Make sure the inside of
the knob is dry before replacing.
Replace the knob in the PROOF position to ensure
proper placement.
Stainless Steel - Excluding Black Stainless Steel (on some models)
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always wipe
the surface in the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel surface.
Cleaners with oxalic acid such as Bar Keepers Friend Soft
Cleanser™ will remove surface rust, tarnish and small
blemishes. Use only a liquid cleanser free of grit and rub in
the direction of the brush lines with a damp, soft sponge.
To inquire about purchasing cleaning products including
stainless steel appliance cleaner or polish, see the
Accessories and Consumer Support sections at the end of
this manual.