GE Phasor CV, Operating Manual

Page: 95 / 116

7. Technical Specifications
PHASOR XS Operating Manual Page 93
7.3 Environmental Tests
Per Mil-Std-810F
Cold Storage -20°C for 72 hrs, 502.4
Procedure I
Cold Operation 0°C for 16 hrs, 502.4
Procedure II
Heat Storage +70°C for 48 hrs, 501.4
Procedure I
Heat Operation +50°C for 16 hrs, 501.4
Procedure II
Damp Heat / Humidity
(storage)
10 Cycles:
10hrs at +65°C down to
+30°C, 10 hrs at +30°C up to
+65°C, Transition within 2 hrs,
507.4
Temperature Shock 3 Cycles:
4 hrs at –20°C up to +70°C,
4 hrs at +70°C, Transitions
within 5 mins. 503.4
Procedure II
Vibration 514.5-5 Procedure I, Annex
C, Figure 6,
General exposure: 1hr each
axis
Shock 6 cycles each axis, 15g, 11ms
half sine, 516.5 Procedure I
Loose Cargo 514.5 Procedure II
Transit Drop
(packaged for shipment)
516.5 Procedure IV, 26 drops
IP54 / IEC529 … Dust Proof / dripping water proof as per IEC
529 specifications for IP54 classification
7.4 Phased Array Probes
Product
Code
Frequency
MHz
Element
Cable
Length
Count
Aperture Elevation Pitch
mm 2 inch 2 mm inch mm inch m ft
L8U84 2 8 8 x 9 .31 x .35 9 .35 1 .039 2 6.5
L8U96 4 16 8 x 9 .31 x .35 9 .35 0.5 .020 2 6.5
EUN75 5 32 16 x 10 .63 x .39 10 .39 0.5 .020 2 6.5
L99HK 5 16 16 x 10 .63 x .39 10 .39 1 .039 2 6.5
L99KO 2.25 16 16 x 13 .63 x .51 13 .51 1 .039 2 6.5
L99LQ 2.25 16 24 x 19 .94 x .75 19 .75 1.5 .059 2 6.5
L99JM 5 64 64 x 10 .2.5 x .39 10 .39 1 .039 2 6.5
GE Inspection Technologies: productivity through inspection solutions GE Inspection Technologies provides technology-driven inspection solutions that
deliver productivity, quality and safety. We design, manufacture and service Ultrasonic, Remote Visual, Radiographic and Eddy Current equipment and
systems. Offering specialized solutions that will help you improve productivity in your applications in the Aerospace, Power Generation, Oil & Gas, Automo-
tive or Metals Industry. Contact your GE Inspection Technologies representative or visit www.ge.com/inspectiontechnologies for more information.