4-3
Panda iRes Warmer
M1110737 006
© 2007 General Electric Company, all rights reserved
Cleaning Instructions
After each patient use, follow your hospital’s infection control procedures for surface disinfection.
Wipe down the surfaces of the warmer with a soft cloth dampened with a disinfectant-detergent
solution. Always follow the cleaning solution manufacturer’s direction for use. Dry all surfaces with a
soft cloth to remove any cleaner residue.
WARNING:
Do not clean the radiant heating element
inside the protective grid.
WARNING:
Disconnect the power cord before cleaning the warmer.
CAUTION:
Electronic devices in the microprocessor controller are susceptible to damage from
discharges of static electricity. These devices are adequately protected, but can be
damaged if the unit is disassembled beyond that recommended for cleaning and
maintenance.
WARNING:
The heater, lamps and surrounding areas are hot.
WARNING:
Do not spray cleaning solution into the
vents on the back of the heater housing;
this can damage electronics inside the unit.
