Panda iRes Warmer
M1110737 006
© 2007 General Electric Company, all rights reserved
3-16
Using the X-ray tray
WARNING:
Never place the baby on the X-ray tray.
Illustration
Step
1
Lower the side bedside panel and place
a film cassette on the optional tray that
slides out from under the mattress for X-ray
procedures.
The tray slides out on either side
of the bed. The cassette can be slid into the
cavity under the mattress without moving
the baby.
Note: Mattress removed for illustrative
purposes.
Using the observation and procedure lights
Illustration
Step
Description
1
Two observation lights are located in the
heater head on either side of the heater dish
(1). The observation lights serve as general
illumination of the bed surface and can be
set to the desired light intensity using the
observation light dimmer knob located on
the lower right corner of the control panel.
Using the procedure light (optional)
An optional aimable procedure light (2) is
located just below the heater dish. The
procedure light provides a more intense spot
light to illuminate a precise area during pro-
cedures. The procedure light can be directed
at any point on the mattress and is activat-
ed using the switch on the light handle (3).
The procedure light is not intended for use
during surgical procedures.
