PACE Series SCPI Manual
K0472 Revision A
4-59
:SENS:PRES:CORR:HEAD
Applicability:
PACE1000, PACE5000, PACE6000
Command Syntax
:SENSe[x][:PRESsure]:CORRection:HEAD <enumerated>,<decimal>
where x = 1 or 2 is the module number (default - 1)
Parameters:
<enumerated>
AIR
-
Air used as gas
NITRogen -
Nitrogen used as gas
<numeric>
Height of gas in metres.
Short form::
SENS:CORR:HEAD <enumerated>,<numeric>
Function:
Head correction parameters.
Default:
Enumerated AIR
decimal
0
Query Syntax
:SENSe[x][:PRESsure]:CORRection:HEAD?
where x = 1 or 2 is the module number (default - 1)
Short form:
SENS:CORR:HEAD?
Function:
Query gas and height of head correction.
Response:
AIR/NITRogen and height in metres (+100 to -100).
Description
A correction must be made if the unit under test is at a different height from the instrument.
This command programs the gas used and the height difference.
Note:
NITROGEN or NITR is an enumerated data type (not in punctuation marks), not a string
and is not case-sensitive and can have a short form.
Example 1
TX> :SENS:PRES:CORR:HEAD?
RX> :SENS:PRES:CORR:HEAD AIR, -0.7500000
Example 2
Head correction can be set to a new height by the command:
TX> :SENS:PRES:CORR:HEAD AIR, 1.2
Example 3
Another query will confirm the height change:
TX> :SENS:PRES:CORR:HEAD?
RX> :SENS:PRES:CORR:HEAD AIR, 1.2000000
Example 4
Head correction can be set for another gas by:
TX> :SENS:PRES:CORR:HEAD NITROGEN, 1.2
Example 5
Another query will confirm the height change:
TX> :SENS:PRES:CORR:HEAD?
RX> :SENS:PRES:CORR:HEAD NITR, 1.2000000
