PACE Series SCPI Manual
K0472 Revision A
4-83
:SOUR:MACH:LEV:IMM:AMPL
Applicability:
PACE6000
Command Syntax
:SOURce[x]:MACH[:LEVel][:IMMediate][:AMPLitude] <number>
where x = 1 or 2 is the module number (default - 1)
Parameter:
<decimal> in MACH number.
Short form:
SOURce:MACH <number>
Function:
Sets the MACH set-point
Default:
0.0
Query Syntax
:SOURce[x]:MACH[:LEVel][:IMMediate][:AMPLitude] <number>?
Short form
SOURce:MACH?
Function:
Programmable set-point value
Response:
Decimal number representing the set-point in MACH number.
Description
This command sets the MACH set-point. This query gets the decimal number representing
the set-point in MACH number.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.
