LOCATION 24
EVENT SELECTION FOR REPORT CONTROL 6 BY PARTITION (16 segments, feature selection
data)
All events for report control 6 are disabled by default. See location 4.
LOCATION 25
PRIMARY REPORTING FLAG FOR REPORT CONTROLS (1 segment)
The NX-7002 contains up to six report controls. Turn on the relevant option to enable primary
reporting for that report control. Turn off the option to enable secondary reporting for that
report control. When secondary reporting is enabled, the report control acts as a backup for
the control panel.
Segment 1
1 = On: Report Control 1 acts as Primary Reporting;
Off: Report Control 1 acts as Secondary Reporting
2 = On: Report Control 2 acts as Primary Reporting;
Off: Report Control 2 acts as Secondary Reporting
3 = On: Report Control 3 acts as Primary Reporting;
Off: Report Control 3 acts as Secondary Reporting
4 = On: Report Control 4 acts as Primary Reporting;
Off: Report Control 4 acts as Secondary Reporting
5 = On: Report Control 5 acts as Primary Reporting;
Off: Report Control 5 acts as Secondary Reporting
6 = On: Report Control 6 acts as Primary Reporting;
Off: Report Control 6 acts as Secondary Reporting
7-8
Reserved
LOCATION 26 –
LOCATION 31
RESERVED
LOCATION 32
PPP (dial-up account) USER ID, characters 1 - 16 (16 segments)
Optional if using TCP/IP reporting. Contact the network provider to confirm if a PAP login is
required and to obtain the user ID and password.
LOCATION 33
PPP (dial-up account) USER ID, characters 17 - 32 (16 segments)
See location 32.
LOCATION 34
PPP (dial-up account) PASSWORD, 16 characters (16 segments)
See location 32.
LOCATION 35 –
LOCATION 59
RESERVED
LOCATION 60
NAME OF GPRS ACCESS POINT - APN, characters 1 - 16 (16 segments)
This is a mandatory setting if using TCP/IP reporting. Contact the network provider to obtain
the GPRS access point name.
LOCATION 61
NAME OF GPRS ACCESS POINT - APN, characters 17 - 32 (16 segments)
See location 60.
NX-7002 Installation manual
Page 17
09/02/05
