3–10
MM200 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
GRAPHICAL CONTROL PANEL
CHAPTER 3: CONTROL PANEL
Actual values pages
The actual values pages are divided into three sections for the MM200.
•
Summary (overview of primary actual values)
•
Amps (metered current values)
•
Sensor (metered temperature and thermistor values)
The actual values summary page displays a summary of the analog actual values. The
current and sensor actual values pages are accessible from the summary page through
the corresponding soft-keys at the bottom of the screen.
Some typical actual values screens are shown below.
Figure 3-9: Typical actual values current page
Status pages
The status pages shown provide the user with up-to-date information on the current status
of the MM200.
Status pages are divided into four sections.
•
Message (displays all locked out conditions plus conditions such as alarms, internal
faults, control status, etc.).
•
Inputs (displays the present state of assigned contact inputs).
•
Outputs (displays the present state of assigned contact outputs).
•
System (displays the present state of the communications interface).
A typical display is shown below:
Figure 3-10: Typical status message page
Message types are classified by color and associated icon type, as follows::
•
Red Triangle = Trip
•
Orange Square = Alarm
•
Blue Circle = Inhibit
