GE MDS entraNET 900, Technical Manual

Page: 137 / 220

05-4055A01, Rev. E MDS entraNET Technical Manual 127
8. The Wizard displays a prompt to select a point-to-point or
point-to-multipoint connection. Press
A
to select “One Remote”
(point-to-point).
Figure 5-9. Point-to-Point Selection
9. The Wizard displays a prompt for the Unit ID of the single Remote
radio. Press
A
to set the Remote ID (generally the last four digits of
the Remote serial number). Type the Unit ID of the Remote radio.
Press
to accept the Unit ID. Then press
N
to continue.
Figure 5-10. Set Remote Unit ID
ENTER