GE MDS entraNET 900, Technical Manual

Page: 68 / 220

58 MDS entraNET Technical Manual 05-4055A01, Rev. E
Figure 3-23. Serial Configuration Wizard (Initial Screen)
To start the Serial Configuration Wizard, choose
Begin Wizard
. The
Wizard presents an opening screen ( Figure 3-24 ) where you select the
method the host computer uses to connect to the radio.
Invisible place holder
Figure 3-24. Serial Configuration Wizard Menu
(Host Connection screen)
Next, a series of screens are presented where you set all of the
parameters needed for proper operation of the serial port(s). The screens
provide text that assist you in making your selections.
At the end of the configuration process, the View Current Settings
Screen is displayed, where you can review or change any of the settings.
Once you are satisfied with the settings, you can commit the changes
and exit the Serial Configuration Wizard by choosing the last selection
on the
View Current Settings Screen .