GE JV347IFWW, Owner'S Manual And Installation Instructions, Page: 8 / 14

PART QUANTITY
Grease Filter 1
Charcoal Filter 1
Mounting Screws
4
(8 - 18 ″ x 3/4 ″ Phillips pan
head)
Exhaust Adaptor
1
(for 3
1
⁄
4
″ x 10 ″ rect . venting)
Exhaust Adaptor Screw
(8 - 18 ″ x 3/8 ″ Phillips pan
head or hex head)
8
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement .
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer .
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made by
arrangement between customer and installer .
DAMAGE – SHIPMENT/INSTALLATION
PARTS INCLUDED
MOUNTING SPACE
NOTES:
•
Hood width may be greater than the width of the range
or cooktop, but it may not be smaller .
• Ensure the range or cooktop is installed per
manufacturer’s installation instructions .
• If you are going to vent your range hood to the outside,
see the “Ducting Requirements” section for exhaust duct
preparation .
66 ″ or more
from the
floor to the
top of the
hood
24
″ , 30
″ or 36
″
to
match cooktop
width
30 ″
min .
Bottom edge of
cabinet needs
to be 30
″
or
more from
the cooking
surface
Flat-blade and Phillips
screwdrivers
Pencil
Metal snips
(in some
applications)
Electric drill
Saw (saber or
keyhole)
Duct tape
Pliers
Level
Caulking
Tape measure
TOOLS YOU WILL NEED
1/4
″
pivoting
hex socket
Flashlight
Wire stripper
1/4 ″ Nutdriver
Installation Instructions
1