Care and Cleaning
Note:
cooktop
cool before touching or handling.
care and cleaning are
Grill Module
important so your
will give
you efficient and satisfactory service.
Follow these directions carefully in
caring for your cooktop to assure
safe and proper maintenance.
Modules
CAUTION
Be sure all controls are turned
OFF before attempting to remove
a module or heating unit.
. Do not attempt to clean plug-in
surface units, plug-in griddle or
grill heating units in an automatic
dishwasher.
Do not immerse plug-in surface
units in liquids of any kind.
Do not bend the plug-in surface
unit plug terminals.
Pan
remove:
Lift off the grill grate. It can
be washed in the sink or in the
dishwasher.
Unplug the grill heating unit. Do
not attempt to clean the heating
●
the reflector pan out of
the cooktop tub. Clean in sink
or dishwasher.
●
Do not attempt to clean, adjust
Wipe out tub with hot soapy
or in any way repair the plug-in
receptacle.
water then rinse with a damp cloth.
To replace:
●
Place the reflector pan in the
cooktop tub with the hole for the
plug-in towards the outside of the
Cooktop.
●
Plug in the grill heating unit.
. Place the grill grate on top of the
reflector pan.
Surface
Unit Module
Drip
Tab
Wipe around the edges of the
surface unit opening in the cooktop
or module. Clean the area below
the unit. Rinse all washed areas
with a damp cloth or sponge.
Plug-in units can be removed.
Clean the area under the drip pans
often. Built-up soil, especially
grease, may catch
To make
cleaning easier, the entire module
and the plug-in surface units are
removable.
25
Lift a plug-in unit about 1“ above
the trim ring—just enough to grasp
it—and you can pull it out.
Do not lift a plug-in unit more
than If you do, it may not lie
flat on the trim ring when you
plug it back in.
Repeated lifting of the plug-in
unit more than 1“ above the trim
ring can permanently damage
the receptacle.