Operating Instructions
10
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
Throughout this manual, features and appearance may vary from your model.
How to Light a Gas Surface Burner
Make sure all the surface burners are
placed in their respective positions.
Push the control knob in and turn it
to the
LITE
position.
You will hear a little
clicking
noise—
the sound of the electric spark igniting
the burner.
Turn the knob to adjust the flame size.
If the knob stays at
LITE,
it will continue
to click.
When one burner is turned to
LITE,
all the burners spark. Do not attempt to
disassemble or clean around any burner
while another burner is on. An electric
shock may result, which could cause you
to knock over hot cookware.
Push the control knob in and turn it
to the
LITE
position.
Using the gas surface burners.
Before Lighting a Gas Burner
After Lighting a Gas Burner
■
Make sure all burners are in place.
■
Make sure all grates (and the center
griddle, if it is going to be used) on the
range are properly placed before using
any burner.
■
Do not operate the burner for an
extended period of time without
cookware on the grate. The finish on
the grate may chip without cookware
to absorb the heat.
■
Be sure the burners, griddle and grates
are cool before you place your hand, a
pot holder, cleaning cloths or other
materials on them.
Surface Burner Controls
Knobs that turn the surface burners on and
off are marked as to which burners they
control. The two knobs on the left control
the left front and left rear burners. The two
knobs on the right control the right front
and right rear burners. The center left knob
controls the center oval burner.
The center oval burner is the largest in size
and is for large oval pots/pans, round
pots/pans 10
″
or greater in diameter or
with the griddle.
The side burners are all the same size
and power.
How to Select Flame Size
For safe handling of cookware, never let the flames
extend up the sides of the cookware.
Watch the flame, not the knob, as you
reduce heat. When fast heating is desired,
the flame size on a gas burner should
match the cookware you are using.
Flames larger than the bottom of the
cookware will not result in faster heating
of the cookware and could be hazardous.
Use only large oval pots/pans, round
pots/pans 10
″
or greater in diameter or
the griddle on the center burner.
