Automatic Defrosting
With the Auto Defrost feature,
the oven automatically sets the
defrosting times and power levels
for you. You choose the appropriate
Code number from 1 to 3 for the
food you are defrosting, then enter
the food weight in pounds and
tenths of a pound (see Conversion
Guide below) and touch START.
The oven calculates defrosting time
and changes power levels during
defrosting to give even defrosting
results.
How to set Auto Defrost
Before you begin, check the guide
located at bottom of oven when you
open the door. It shows minimum
and maximum Food Weights for
each code number. You will need
to know your Food Weight and
corresponding Code before
setting Auto Defrost.
1. Remove food from package,
place in oven on microwave-safe
dish and close door.
2. Touch AUTO DEFROST pad.
“ENTER CODE” flashes on display.
4. Enter weight. For example, touch
Number Pads 1 and 2 for weight of
1.2 pounds (1 pound, 3 ounces. See
Conversion Guide below.)
Display shows
and
“CODE
After 4 seconds,
“START” flashes.
5. Touch START pad. Display
shows Defrost Time counting down.
Once
during defrosting, the oven
beeps 4 times and “turn” flashes.
“Turn” flashes until you open the
door, attend your food (see guide
on next page), close the door and
touch START.
When defrosting time is completed,
“End” flashes and oven beeps 4
times. “End” remains on display
and oven beeps once a minute until
door is opened or CLEAR/OFF
pad is touched.
Stand
When using the Auto Defrost
feature, it is necessary to allow
meat to stand in order to finish
defrosting the interior. You may take
the meat-out of the oven if
wish
Stand time recommendations are
given in the guide on the next page.
Conversion Guide
If weight of food is stated in
pounds and ounces, the ounces
must be converted to tenths (.1)
of a pound.
Ounces
Pounds
1-2
.1
3
.2
4-5
.3
6-7
.4
8
.5
9-1o
.6
11
.7
12-13
.8
14-15
.9
12
