background image

Safety Instructions

Operating Instructions

Care and Cleaning

Installation Instructions

Troubleshooting T

ips

Customer Service

13

Cook and Hold

Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished. 

To activate this feature, follow the steps
below.

Press the 

BAKE

and 

BROIL HI/LO

pads

at the same time for 3 seconds until
the display shows 

SF.

Press the 

COOKING TIME

pad. The

display will show 

Hld OFF.

Press the 

COOKING TIME

pad again 

to activate the feature. The display
will show 

Hld ON.

Press the 

START

pad to activate 

the cook and hold feature and 
leave the control set in this special
features mode.

Using Convection Conversion

By using the Convection Conversion feature you
can automatically convert the oven temperature
from regular baking to Convection Bake
temperatures. 

To convert the oven temperature for
convection baking, follow the steps below.

Press and hold the 

CONVECTION

BAKE

pad for 4 to 5 seconds.

CON Con Bake

will show in the display.

Using the number pads, enter 
the temperature recommended 
in the recipe.

Press the 

START

pad.

The display shows the converted
(reduced) temperature. For
example, if you entered a recipe
temperature of 350°F., the display
will show 

325°F.

when it is converted.

Press the 

CLEAR/OFF

pad when

baking is finished.

NOTE: 

Conversion must be set each time you

want to use it. It is not held in memory.

Summary of Contents for JB970 series

















































Reviews: