manualshive.com logo in svg

GE JB970 series, Owner'S Manual And Installation Instructions

Share
Download
GE JB970 series Owner'S Manual And Installation Instructions Download Page 35

Safety Instructions

Operating Instructions

Care and Cleaning

Installation Instructions

Troubleshooting T

ips

Customer Service

35

Read these instructions completely and carefully.

4-Wire Power Cord Installation

WARNING: 

The neutral wire of the

supply circuit is connected to the neutral
terminal located in the center of the connector
block. The power leads must be connected to
the outside (brass colored) terminals. The 4th
grounding lead must be connected to the frame
of the range with the grounding plate and
grounding screw.

Remove the 3 screws from the connector
block.

Remove the grounding screw and strap from
the connector block middle location and the
screw connection to the frame of the range.

Insert screws through each power cord
terminal ring and into connector block until
screw engages nut. Be certain that the center
wire is connected to the center screw of the
connector block. Tighten screws securely.

Attach ground wire to the frame of the
range.

3-Wire Power Cord Installation

WARNING: 

The neutral or ground

wire of the power cord must be connected to 
the neutral terminal located in the center of the
connector block. The power leads must be
connected to the outside (brass colored)
terminals.

Remove the 3 wire terminal screws from the
connector block. Insert screws through each
power cord terminal ring and into the connector
block until the screws engage the nuts. Be certain
that the center wire is connected to the center
screw of the connector block. Tighten screws
securely. 

Do NOT remove ground strap connection.

Neutral terminal

Ground strap

Power cord

Connector block

Before

Neutral terminal

Ground strap
(grounding to range)

Neutral terminal

After

Grounding plate

Grounding to range

Summary of Contents for JB970 series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands