GE HygroPro, User Manual, Page: 35 / 60

HygroPro User’s Manual Page 29
Chapter 2: Operation
2.2.7 Setting Up the RS485 Output
To set up the RS485 output, complete the following steps:
Enter your passcode to access the setup
program. Then use the arrow keys to
select the
RS485
menu. Press
enter
.
To enter the
Baud Rate
, press
enter
.
Use the
up
and
down
keys to select the
desired value and press
enter
.
Repeat the above procedure to enter the following RS485 parameters:
•
Parity
•
Stop Bits
•
Data Bits
You have now completed the initial setup process.