GE HygroPro, User Manual, Page: 28 / 60

Chapter 2: Operation
Page 22 HygroPro User’s Manual
2.2.2 Entering the Setup Program
To enter the setup program, complete the following steps:
Using the arrow keys, highlight the
opened lock and press
enter
.
Select
Passcode
and press
enter
.
Note:
The default operator-level passcode is
2719
.
Enter your passcode using the
up
and
down
keys to change the value of each
passcode digit, and the
left
and
right
keys to move from one digit to the next.
When the passcode is correct, press
enter
.
Note:
To enter the
Service
menu, the factory-level passcode must be
entered.