Hydran* M2 Installation Guide
Page 24
16375 v9.0 Oct 12
Figure 19: Installing the Hydran M2 on the Sensor
Figure 20: Grounding the Hydran M2 Enclosure
Connect ground wire to
ground lug
using a 10-
6 AWG copper wire.
1.
Insert the sensor cable connector into the sensor
connector.
2.
Rotate connector clockwise (approximately 1/8 turn).
3.
Position the enclosure and push it on to the sensor; taking
care not to squeeze the sensor cable between the sensor
and the enclosure.
4.
Install the sensor clamp and tighten it using the supplied
spanner wrench.
5.
Tighten set screw using 1/16-in Allen key.
