49-50323
11
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
MOUNTING SYSTEM INSTALLATION (CONT.)
Mounting System to Screws Installed in Wall
1. Remove shrink wrap from filter system.
+DQJWKHV\VWHPRQWKHSUHYLRXVO\LQVWDOOHGVFUHZVXVLQJWKHRSHQLQJVRQWKHEDFNRIWKHXQLW)LJ
3. If the head of the screw will not slide into the upper slot, back out the screw by 1/4 turn and try again.
4. If the system is too loose when placed on the wall, tighten the screws by 1/4 turn and try again until a desired
fit is achieved. Alternately, it is possible to remove the top of the manifold during installation and tighten the
VFUHZVWRDFKLHYHWKHGHVLUHGILW'212729(57,*+7(15HSODFHWKHWRSRIWKHPDQLIROGZKHQFRPSOHWH
Min.
17 inches
5 inches
Fig. 7