GE GTRS0 Series, Technical Service Manual

Page: 24 / 63

Freezer Door Handles
1. Remove the screws and handle from the
freezer door.
2. Move the plug button to the opposite side of
the door and install in the handle screw hole.
3. Install the handle to the opposite side of the
door using the holes closest to the edge of
the door.
Rehanging The Doors
1. Lower the fresh food door onto the bottom
hinge pin.
Note:
Ensure that the washer is on bottom
hinge pin.
2. Line up the fresh food door with the center
hinge bracket. Install the hinge pin in the
center hinge bracket and door with a 3/4-in.
socket. Tighten the hinge pin in the center
hinge bracket.
3. Install the freezer door onto the center hinge
pin and upper hinge (screws loose). Support
the door on the handle side and make sure
the door is straight and the gap between the
doors is even across the front. While
holding the door straight, tighten the top
hinge screws.
Hinge Pin
Center Hinge
Bracket
Center Hinge Pin
– 10 –