GE GLM064, User Manual

Page: 44 / 141

Chapter 4. Configuration
GFK-3030 December 2017 37
4.6 MRP Settings for IO-Devices
Media Redundancy Protocol (MRP) is supported by PACSystems PROFINET Controllers. Refer to the PACSystems
RX3i & RSTi-EP PROFINET I/O Controller Manual, GFK-2571,
To access the MRP parameters associated with a target IO-Device, display the hardware configuration in PME,
then double-click on the IO-Device of interest (Figure 30).
Figure 30: Accessing the MRP Parameters of an IO-Device
The parameters are displayed in the form at right (Figure 30).
In the
Media Redundancy tab (Figure 31), change the Media Redundancy field to meet your requirements. The
options are “None”, “Client” and “Manager”.
I f “Client” or “Manager” is selected, set up or modify the ring ports in the Media Redundancy tab (Figure 31).
Figure 31: Set up MRP Ring Ports
PME also permits the user to set up dual MRP in a single IO-Device. The two MRP implementations are
independent and use different ports. To modify the parameters of the second group, select the
MRP Group2
Data tab (Figure 32).
Figure 32: MRP Group2 Data Tab