GE GLM064, User Manual

Page: 112 / 141

Appendix A. Command Language Interface (CLI)
GFK-3030 December 2017 105
SNMP Configure Commands
A.3.9.1 snmp-server
Description Enable SNMP server
Syntax snmp-server
Parameter
Name Description
A.3.9.2 snmp-server access
Description snmp-server access configuration
Syntax snmp-server access < group name > model { v1 | v2c | v3 | any } level { auth | noauth |
priv } [ read <word255> ] [ write <word255> ]
Parameter
Name Description
< group name > 32 words
< v1 | v2c | v3 | any > V1~v3 security model
< level > security level
{ auth | noauth | priv } authNoPriv Security Level
noAuthNoPriv Security Level
authPriv Security Level
read specify a read view for the group
<word255> read view name
A.3.9.3 snmp-server community v2c
Description Set the SNMP v2c community
Syntax snmp-server community v2c <word127> [ ro | rw ]
Parameter
Name Description
< word127 > Community word
< ro > Read only
<rw> Read write
A.3.9.4 snmp-server community v3
Description S Set the SNMP v3 community
Syntax snmp-server community v3 <word127> [ <ipv4_addr> <ipv4_netmask> ]
Parameter
Name Description
< word127 > Community word
< ipv4_addr > IPv4 address
<ipv4_netmask> IPv4 netmask