GE GLM064, User Manual

Page: 100 / 141

Appendix A. Command Language Interface (CLI)
GFK-3030 December 2017 93
A.3.4.9 switchport hybrid egress-tag
Description Egress VLAN tagging configuration
Syntax switchport hybrid egress-tag { none | all [ except-native ] }
Parameter
Name Description
none No egress tagging
all Tag all frames
except-native Tag all frames except frames classified to native VLAN of the hybrid port
A.3.4.10 switchport hybrid ingress-filtering
Description VLAN Ingress filter configuration
Syntax switchport hybrid ingress-filtering
Parameter
A.3.4.11 switchport mode
Description Set switching mode
Syntax switchport mode { access | trunk | hybrid }
Parameter
Name Description
access Set mode to ACCESS unconditionally
trunk Set mode to TRUNK unconditionally
hybrid Set mode to HYBRID unconditionall
A.3.4.12 switchport trunk allowed vlan
Description Set allowed VLAN characteristics when interface is in trunk mode
Syntax switchport trunk allowed vlan { all | none | [ add | remove | except ] <vlan_list> }
Parameter
Name Description
all All VLANs
none No VLANs
add Add VLANs to the current list
remove Remove VLANs from the current list
except All VLANs except the following
vlan_list VLAN IDs of the allowed VLANs when this port is in trunk mode
A.3.4.13 switchport vlan protocol group
Description Protocol-based VLAN group commands
Syntax switchport vlan protocol group <word16> vlan <vlan_id>
Parameter
Name Description
word16 Group Name (Range: 1 - 16 characters)
vlan_id VLAN ID required for the group to VLAN mapping (Range: 1-4095)