10
49-3000217 Rev 2
Getting started
USING THE W
ASHER
E
Options
Delay Wash/Remote Start
You can delay the start of a wash cycle for up to 24 hours or remote start the washer by using the
Delay Wash/
Remote Start
feature. Press to step by hours or hold to scroll the
Delay Wash
pad to set the amount of time
you want to delay the start of the wash cycle. If you have connected your washer to WiFi, the first selection,
“APP”, can be selected to enable remote starting of your washer from the GE Appliance Smartphone app. Or,
if you select a delay time in hours, the machine will count down and start automatically following this period.
Press the
Start
pad once you have configured the
Delay Wash
to the proper setting to enable this feature. To
cancel this option, simply power off and power on the controls.
NOTE:
If you forget to fully close the door, a reminder signal will beep reminding you to do so.
NOTE:
If you open the door when the delay is counting down, the machine will enter the pause state. You must
close the door and press
Start
again in order to restart the countdown.
Time Saver
(on some models)
This option reduces the overall washer cycle time by optimizing the wash, rinse and spin actions and/or
gently raising the wash temperature to get clothes cleaned faster. Option is available on
NORMAL
,
WHITES
,
TOWELS
,
DELICATES
,
BULKY Bedding
and
ACTIVE WEAR
cycles. Total wash time will vary based on
cycle chosen and options selected.
To use:
1.
Turn power on and select a wash cycle which has
Time Saver
as an option.
2.
Press the
Time Saver
pad to reduce the overall wash time.
3.
Press the
Start/Pause
pad.
More Water
(on some models)
This option adds approximately 3 gallons to the wash and rinse portions of the cycle. If the option is selected
before the cycle starts, the water will be added from the beginning of the wash cycle and later to the rinse. If
the option is selected during the wash portion, more water will be added at this point and later to the rinse.
Likewise, if the
More Water
option is selected after the wash portion has completed, the washer will add more
water to the rinse only. If wash and rinse have completed, the
More Water
pad will no longer be active.
ULTRAFRESH VENT System with ODORBLOCK™
The ULTRAFRESH VENT System with OdorBlock was designed to eliminate excess moisture in the washer
following a wash cycle to help prevent odors from developing. This washer was designed to drain water at the
end of the cycle more effectively. Following the wash cycle, the user can then choose to leave the door open
or select the ULTRAFRESH VENT feature to assist with drying out the gasket and other areas of the washer.
The OdorBlock system features multiple components which are manufactured with Microban
®
antimicrobial
technology.* Microban is a safe and effective antimicrobial technology that will last the life of your washer. For
more information, please visit
www.microban.com/geappliances
.
ULTRAFRESH VENT is available after the wash cycle is complete and you have removed your cleaned
laundry. Once the door is closed, a notification tune will play and the
ULTRAFRESH VENT
pad LED will blink.
Upon pressing the pad, ULTRAFRESH VENT will begin.
To select ULTRAFRESH VENT at any other point, power on the washer, ensure a cycle is
not actively running, and remove any garments from the basket, then press and release the
ULTRAFRESH VENT
pad so that the notification tune plays and the
ULTRAFRESH VENT
pad
LED begins to blink. Then press the
ULTRAFRESH VENT
pad again to start the feature.
During the operation of ULTRAFRESH VENT the door will remain locked and the washer will intermittently spin
at low speeds for up to 8 hours.
If garments are detected in the basket during ULTRAFRESH VENT, the washer will instead run
TUMBLE
CARE
or
1 STEP WASH + DRY
, based on option availability for your model.
The ULTRAFRESH VENT feature may be cancelled at any time by pressing the
POWER
pad, turning the cycle
knob, or pressing the
ULTRAFRESH VENT
pad.
*Microban
®
is a registered trademark of Microban International, Ltd.
