5
July 2018
GFK-3000A
3.1
Connect Input Power to Energy Pack
IMPORTANT
Before connecting input power, see complete
installation instructions in the
PACSystems
Controllers: Battery and Energy Pack Manual,
GFK-2741E or later.
You will need:
▪
A 24Vdc, 72W SELV power supply
▪
A power cord with 18 AWG (0.82mm
2
) copper wires
▪
An 18 AWG (0.82mm
2
) copper wire for frame ground
▪
An input power terminal block
–
provided
(Weidmuller part number 1748010000)
▪
A small flat-head screwdriver (such as a 1.4mm
jeweler’s screwdriver)
1.
Using the power cord, connect the power supply
output to the
Energy Pack’s
input power terminal
block.
To insert the wires in the power terminal block
connector, you may need to use the small
screwdriver to release the spring clamp on the
terminal block.
Recommended wire stripping length is
7mm (0.28 in).
Summary of Contents for GFK-3000A
Page 17: ......
