GE GFK-3000A, Quick Start Manual

Page: 14 / 17

GFK-3000A IC695ACC403 Quick Start Guide 12
because this could result in Controller
memory not being preserved.
The Energy Pack LEDs and the Controller
status bits indicate when charging is
complete and the Energy Pack is ready to
support backup.
5.
To remove a Failed Battery fault and clear
the battery status bits, clear the Controller
fault table.
For details on status bit operation, refer to
the
PACSystems RX7i and RX3i CPU
Reference Manual , GFK-2222 (rev. Y or later).
8 Firmware Updates
The firmware for the Energy Pack is automatically
updated by the Controller. At power-up, the
Controller checks the version of Energy Pack firmware
to verify compatibility with the Controller firmware. If
an update is needed, the Controller performs it
automatically.
8.1 LED Indications for Firmware Updates
Firmware Update
Mode All three LEDs blink green
Failed to Load
Firmware All three LEDs blink red