– 34 –
5. Disconnect the wiring harness from the water
inlet valve.
6. Remove the clamp and outlet hose from the
valve.
Disconnect
Clamp
Hose
7. Remove the 4 Phillips-head screws from the
water inlet valve bracket.
Caution: To prevent water leakage, assure the
O-ring is retained in the valve before installing the
bracket.
O-Ring
3. Remove the two 5/16-in. hex-head screws from
the water inlet valve bracket.
4. Slide the bracket down to disengage the tab
that holds the bracket to the dishwasher frame.
Tab
Disconnect
2. Disconnect the overfi ll switch wiring harness.