– 26 –
4. Remove the 4 Phillips-head screws from the
back of the vent fan.
5. Remove the 2 Phillips-head screws from the
bottom of the vent fan.
Active Vent
The active vent is attached to the inner door panel
between the vent and door switch. It operates on 12
VDC and has a resistance of 103
The vent motor
turns the active vent switch clockwise to close the
vent and counterclockwise to open the vent.
To remove the active vent:
1. Remove the vent fan. (See
Vent Fan
, steps 1-3.)
2. Disconnect the active vent wire harness.
Disconnect
Inner Door Panel
To remove the inner door panel:
1. Remove the control TCO. (See
Control TCO.)
2. Disconnect 3 wire harnesses from the control
board.
3. Remove the single Phillips-head screw from the
vent switch housing.
Disconnect
Disconnect
Disconnect
(Continued next page)