– 17 –
Dishwasher Components
Outer Door Panel
The outer door panel must be removed to access
the control board, detergent/rinse module, control
TCO, tactile switch, door switch, vent, and lens.
To remove the outer door panel:
1. Remove the two 1/4-in. hex-head screws from
the bottom of the front door panel (one on each
side).
3. Remove the single Phillips-head screw from the
control cover.
2. Remove the ten T-15 torx screws from the outer
door panel.
Caution: Carefully remove the outer door from the
inner door frame.
4. Disconnect the wire harness from the tactile
switch.
Disconnect
Water Hardness Test and Calibration
Test Water Hardness
The automatic liquid dishwasher detergent
dispenser (SmartDispense
TM
) dispenses the optimum
amount of detergent to clean the dishes. The
amount of detergent introduced during each cycle
is based on the soil level of the dishes and the
hardness of the water. Therefore, the correct water
hardness setting is very important for both optimum
cleaning of dishes and detergent usage.
(Continued next page)