GE Everest Ca-Zoom 6.2 Operating Manual Download

Page: 41 / 105

Everest Ca-Zoom

6.2

Sensor Units

Usage

• Allows user to set temperature to set pressure to PSIG, BAR or Zero

Access

• Highlight Sensor Units

Operation

  •  Move pointer arrow to either PRESSURE or RADIATION
  •  Or PSIG, BAR or SET TO ZERO in Pressure
  •  Or krad or Gy in Radiation
  •  Press

ENTER

. A check mark will appear next to your selection.

To Accept

• Press

MENU

Sensor Display

Usage

• Displays sensor units on the LCD screen

Access

• Highlight Sensor Display

Operation

  •  Move pointer arrow to Pressure, Pan & Tilt or Radiation.
  •  Move pointer arrow ON or OFF.
  •  Press

ENTER

. A check mark will appear next to your selection.

To Accept

• Press

MENU

Temp Sensor

ICON

(On/Off)

• Allows thermometer icon on the PTZ’s LCD to be turned on or off.

Access

• Highlight TEMP

SENSOR

• Move the pointer arrow to

ICON

. A drop-down menu with

ON/OFF

appears.

• Press

ENTER.

A check mark will appear next to your selection.

To Accept

• Press

MENU

AUDIO WARNING

(On/Off)

• Allows audio warning to be turned on or off when PTZ camera head temperature reaches

operating limits.

Access

• Highlight TEMP

SENSOR

Summary of Contents for Everest Ca-Zoom 6.2










































































































Search results

Summary of Contents for Everest Ca-Zoom 6.2

Reviews:

Related manuals for Everest Ca-Zoom 6.2

Brands by name

Popular brands

GE Everest Ca-Zoom 6.2, Operating Manual

Search results

Summary of Contents for Everest Ca-Zoom 6.2

Reviews:

Related manuals for Everest Ca-Zoom 6.2

Brands by name

Popular brands