35
08/24/2016
6. Edition, ID No.: 37020GB-F
Operating Manual ERESCO MF4 Type Series
Copyright by GE Sensing & Inspection Technologies GmbH Bogenstrasse 41 D - 22926 Ahrensburg
2.9
Generating Programs
In
MANUAL
mode, set the desired parameters as described under section 2.3.
Use the
F1
key to change the function key arrangement:
Press the
F2
key. A list with 250 program positions of the data source appears, which
is activated in the setup menu item
14 Memory location:
Use the arrow keys
and
to select the desired program position and press the
F4
key to save the program.
NOTE:
If you attempt to program a program without an exposure time, the following
message appears:
66: Exposure time = 0
Press the
F5
key to delete the message, enter the desired exposure time
in manual mode, and save the program as described above.
If a program already exists under the desired program number, the following message
appears:
