DuraStation™ EV Charger User Manual
5
GE Industrial Solutions
©2014 GE Company All Rights Reserved
Owners should contact 1-888-GE-RESOLVE or [email protected] for any operational issues with
DuraStation.
Users should contact 1-855-4GE-EVSE for any issues.
The following symbols are used for important safety information in this document:
3
Features
3.1
Overview
The DuraStation
Pedestal is a SAE J1772
TM
compliant Level 2 (208 – 240VAC) EVSE and has a 30A maximum
current rating. This product will be floor/ground mounted and designed to reside indoors or outdoors (NEMA
type 3R enclosure)
3.1.1
RFID swipe indicator
The RFID swipe indicator is on the top assembly that indicates
where a user should swipe their RFID card.
3.1.2
QR Code
The top assembly of the DuraStation has a ¾” x ¾” Quick Response (QR) code label placed under the
top assembly cover, viewable through the top cover. Each QR code holds a unique serial number in its
image. The QR code serial number is stored in the EVSE’s SBC (Single Board Computer).
An EV driver or EVSE owner can use their iPhone and the GE DuraStation application to scan the QR
code. Once the QR code is captured, the application will automatically connect to the GE WattStation
Connect and provide the driver or EVSE owner with access and information for the DuraStation.
Figure 3.3
WARNING:
Denotes operating procedures and practices that may result in
personal injury or loss of life if not correctly followed
CAUTION:
Denotes operating procedures and practices that, If not strictly
observed, may result in damage to, or destruction of equipment.
NOTE:
Notes call attention to information that is especially significant in
understanding and operating the equipment.
