GE Druck PACE1000, Safety Instructions And User Manual

Page: 5 / 148

[EN] English 4 K0467 Revision A
1.8 Packaging
Check the contents of the PACE1000 packaging with the list that follows:
Packaging List - PACE1000
i) PACE1000 Pressure Indicator.
ii) Adaptor, power supply (GE part number 191-370).
iii) User guide and safety instructions, and CD containing the full documentation suite.
iv) Calibration certificate.
1.9 Packaging for Storage or Transportation
To store or return the instrument for calibration/repair do the procedures that follow:
1. Pack the instrument (Ref: K0470, User manual, Reference and Specification, Section
6.13).
2. Return the instrument for calibration/repair complete the return goods procedure (Ref:
K0470, User manual, Reference and Specification, Section 6.12).
2 Preparation for Use
The instrument can be used as a:
• Free-standing instrument positioned on a horizontal surface
• Panel-mounted using the panel-mount option kit (Ref: K0470, User manual, Section 2.5)
• Rack-mounted in a standard 19 inch rack using the rack-mount option kit (Ref: K0470,
User manual, Section 2.5).
For free-standing instruments, the feet on the front of the base can be used elevate the
instrument to a better viewing angle.
Note: Allow a free flow of air around the instrument, especially at high ambient temperatures.
2.1 Connecting the Instrument
WARNINGS
TURN OFF THE SOURCE PRESSURE(S) AND CAREFULLY VENT THE PRESSURE LINES
BEFORE DISCONNECTING OR CONNECTING THE PRESSURE LINES. PROCEED WITH
CARE.
ONLY USE EQUIPMENT WITH THE CORRECT PRESSURE RATING.
BEFORE APPLYING PRESSURE, EXAMINE ALL FITTINGS AND EQUIPMENT FOR
DAMAGE. REPLACE ALL DAMAGED FITTINGS AND EQUIPMENT. DO NOT USE ANY
DAMAGED FITTINGS AND EQUIPMENT.
DO NOT EXCEED THE MAXIMUM WORKING PRESSURE OF THE INSTRUMENT.
THIS EQUIPMENT IS NOT RATED FOR OXYGEN USE.