Chapter 3. Creating Data Recorder Files
DMS Go Operator’s Manual
69
3.1
Creating a Data File (DR - EXPLORER - NEW) (cont.)
Table 3: Items to be Defined for Each File Type
Reading Type
Set file style to Standard (normally recommended) or Extended.
Linear File
Start Point
Defines the number assigned to the first point in the data file.
End Point
Defines the number assigned to the last point in the data file.
File Name
16 character file name, set using the virtual keyboard. No two files in the DMS Go memory
may have the same file name.
Units
Selects either inches or millimeters as the unit of measurement
T-MIN
Defines the minimum thickness limit. Measurements below this limit cause an alarm to signal.
T-MAX
Defines the maximum thickness limit. Measurements above this limit cause an alarm to signal.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980