Chapter 3. Creating Data Recorder Files
DMS Go Operator’s Manual
81
3.4
Accessing the Data Recorder File
In the
MAIN
menu, use the joystick (
) to activate the
DR
submenu (see
). Then, proceed to the appropriate section
below to either create a new file name or select an existing file name.
3.4.1
Selecting a Data File (DR - EXPLORER)
1.
Use the joystick (
) to select the function titled
EXPLORER
in the
DR
submenu, and move it left or right to open the function.
2.
A window opens with the list of files available on the installed SD card. Move the joystick up or down (
) to select the desired
file name from the list of SD card files, and press the center of the joystick (
) to confirm the selection.
3.
A window asks “Show file’s properties?” Move the joystick to select
YES
or
NO,
and press the center of the joystick (
) to confirm
the selection.
(If you select
YES
, go to page 110 for an explanation of the Properties option.
)
4.
Press F1
(
EXIT
)
to exit this function. Press F1 (
HOME
) to return to the Main Menu.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
