Chapter 2. Instrument Setup
DMS Go Operator’s Manual
31
2.3.1f
Setting the Time Before an Unattended Meter Powers Down (CONFIG - POWER DOWN)
The Power Down function powers down the instrument after a preset amount of time in which no one enters any inputs into the DMS Go;
the unit is receiving no button or joystick inputs from the user, and it is not receiving a valid thickness indication (as indicated by a display
solid lettering, rather than hollow). Countdown is reset by a valid measurement or keyboard activity.
1.
In the
MAIN
menu, scroll to the
CONFIG
submenu using the joystick (
).
2.
Use the joystick (
) to select the function titled
POWER DOWN
, and then (
) to enter the number of minutes before the
DMS Go powers down. Your selections are 1, 2, 3, 4, 5, 10, 15, 30 minutes and
Manua
l.
Note:
GE recommends setting the selection to 5 minutes to avoid draining the battery.
3.
After entering the number of minutes, use the joystick (
) to move to another function, or press
HOME
to return to the Main
Menu
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
