Chapter 4. Measuring and Recording Data
94
DMS Go Operator’s Manual
4.2.3
Setting the Freeze (MEASURE - FREEZE)
Freezing the A-scan display allows the user to more closely
evaluate the measurement and/or adjust the A-scan range and gates.You can
program the F4 key (see page 49) to
FREEZE
the display. Then, whenever a display is active, pressing that end of the
Function Toggle
freezes the display. The active display will remain as it appeared when the toggle was pressed and the display will remain frozen until it is
pressed again. While the display is frozen, the displayed readings are based on the frozen echoes.
1.
In the
MEASURE
submenu, activate the
FREEZE
option using the joystick (
).
2.
Move the joystick up or down (
). to turn the freeze
On
. The screen freezes with the current measurement, and a freeze symbol
appears below the function key assignments on the screen. Move the joystick up or down (
). to turn the freeze
Off
.
3.
After making your choice, move the joystick up or down (
) to navigate away from this function, or press
HOME
to return to
the Main Menu.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
