GE DigitalFlow XGS868i, Programming Manual

Page: 140 / 176

Appendix C. Programming the XGS868i Using PanaView™
130 DigitalFlow™ XGS868i Programming Manual
C.6.3c Activating Security in the Global Menu
In order to prevent unauthorized tampering with the flowmeter’s programming, the XGS868i is equipped with a
security feature that locks all the keys except [PROG] (which, when pressed, requires the password).
When the system is locked, access to the menus will be denied unless the correct password is entered. The XGS868i is
shipped with a default password (2719 and three spaces). For increased security, the default password should be
changed.
Note:
Once the system has been locked, it can only be unlocked by entering the password, because access to the
SECUR submenu is restricted.
While completing these instructions, refer to the menu map in Figure 54 on page 141.
1. In the Site Data Menu , double-click on the
Global
entry. If the system is unlocked, the window appears similar to
Figure 46 below. Highlight and double-click on the
Security
option in the center pane.
Figure 46: Global Menu with Security Option Highlighted
2. If the system is locked, the window is similar to Figure 47 below.
Figure 47: Password Window