35
Three-Way calling
Between two handsets or a handset and base and an external call
1. During an external call, press the
int button on the handset or base and the external
call is placed on hold. The list of handsets or base show in the display.
. Use the
5
or
6
button to select desired handset or base. A tone sounds and
PAGING
shows in the originating handset or base display.
NOTE:
PAGING FROM…
shows in the display on the receiving handset or
base, and the receiving handset or base must press the int button or the
OK (SKL) to answer the intercom.
3. When the receiving handset or base connects, press the
UNHOLD (SKR) on the
originating handset or base to conference with the receiving handset or base and the
external caller.
CONFERENCE
shows in the display on the originating and receiving
handsets.
NOTE: A handset or base can enter conference mode directly by
pressing the
LINE 1 or LINE 2
button on the second handset or base
during a call.
Between a handset or base and external calls on the Line 1 and Line 2
1. During an external call on either LINE 1 or LINE , press the
HOLD (SKR) to put the call
on hold.
. If the originating line is LINE 1, press the
LINE 2 button.
LINE 1
icon flashes and
LINE 2
icon shows in the display steadily.
3. Press the
CONF button to conference with the external call.
Transferring External Call to Other Handsets or Base
During an external call, you may transfer the external call to another handset or base.
1. Press the
int button on the originating handset or base to put an external call on hold,
and then page the receiving handset or base.
. The list of handsets or base shows in the display. Use the
5
or
6
button to select
desired handset or base.
3. Press the
SELECT (SKL) to start the page. You will hear a paging tone.
PAGING
shows
on the originating handset’s display or base display, and
PAGING FROM….
shows on
the receiving handset’s display or base display.
4. When the receiving handset connects, press the
END/CANCEL button on the
originating handset or base to transfer the call.
- OR -
Press the
END/CANCEL button on the originating handset or base to transfer the call.
