GE Becker 3.5M Series, Instruction Manual

Page: 18 / 40

18
10
9
Table 6 - Riser Pipe Mount Confi guration Part Numbers
Item # Part # Description
1 31-2005 Adjusting Bushing
2 98-2614 8-32 x 1/2 SHCS (316)
3 98-2538 8-32 Hex Nut (18.8)
4 31-2004 Adjustment Block Probe
5 01-8901 Magnet
6 98-2579 1/4-20 x 1 HHCS (18.8)
7 98-2777 1/4” Lock Washer
8 98-3171 8-32 x 1/2 SHCS
9 Reference
Table 7 Indicator Bar
10 98-2638 1/4-20 x 5/8 SHCS (18.8)
Cylinder Bar Part#
6” 14-3114
8” 14-3130
10” 14-3121
12’ 14-3068
NOTES:
1. Lock the screw (2) after any adjustments are completed.
2. Turn the magnet (5) with the adjustment bushing to align 4 or 20 mA.
Figure 24- Detailed View of the Linear Position Transmitter Standard Assembly
1
2
3
4
5
7
6
8
WARNING: This Model Was Discontinued in 2007
Table 8 - Reversible Fixed Range Linear Position Transmitter Specifi cations
Measured Parameter Specifi cation Analog Output
Repeatability
(Reso Hysteresis)
Voltage-Output Versions 0.5 mV or 5 μm (whichever is greater)
Current-Output Versions 1 μA or 5 μm (whichever is greater)
Sampling Rate
For stroke lengths ≤ 2000 mm 1 kHz
For stroke lengths > 2000 mm 500 Hz
Non-linearity
For stroke lengths ≤ 500 mm ± 100 μm
For stroke lengths > 500 mm ± 0.02% of full-scale
Pressure Rating (Rod) Up to 600 bar
Operating Temperature -40°F to +185°F
Supply Voltage +24 VDC ± 20%
Humidity <90% non-condensing
Table 7 - Indicator Bar Part Numbers