INSTALLATION INSTRUCTIONS
Leave these
instructions
with the appliance.
OWNER: Keep these instructions for future use.
Electrical
Please
Read Carefully
HOW TO CONNECTELECTRICITY
FOR PERSONAL
THIS APPLIANCE
ELECTRICAL REQUIREMENTS
The 11 5-volt models require a
60 Hz
grounded outlet protected with a
delay
fuse or circuit breaker.
The power cord on these models has a
(grounding) plug that mates with a standard
(grounding) wall outlet (Fig. 1
minimize the possibility
of electric shock hazard from these appliances.
The 230/208-volt models require their own single
branch circuit supplying 230/208-volt
protected
with a time delay fuse or circuit breaker. This is
recommended for best
and to prevent
overloading house wiring circuits, which could cause a
possible fire hazard from overheating wires.
The power cord on these models has a 230/208-volt
perpendicular, tandem or
tandem-type plug that
mates respectively with a 230/208-volt perpendicular,
tandem or large tandem-type wall outlet. These types of
outlets are available at most hardware stores.
Where a standard
prong wall outlet is
encountered, it is your
personal responsibility
and obligation to have it
replaced with a properly
grounded
wall outlet.
PREFERRED
METHOD
INSURE PROPER
GROUND EXISTS
Fig. 1
BEFORE USE
L
1-
●
VOLT
MATCHING
WALL
PLUG
CIRCUIT BREAKER PROTECTION
&B
---
MATCHING
WALL
LINE
CORD PLUG
REQUIRES 15
CIRCUIT BREAKER PROTECTION
FUSE OR
CIRCUIT BREAKER PROTECTION
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
Whether your air conditioner is a 115-volt or a 230/
208-volt unit, it is
to have the wall outlet
and circuit checked by a qualified electrician if there
is any doubt as to whether a proper ground exists.
USE OF ADAPTER PLUG
(115-volt
Because of potential safety
hazards under certain conditions,
we strongly recommend
against use of an adapter plug.
However, if you still elect to use
an adapter, where local codes
permit, a temporary connection
may be made to a properly
grounded two-prong wall outlet
by use of a
adapter (Fig.
2) available at most local
hardware stores.
TEMPORARY
PLUGS NOT
IN CANADA)
ALIGN LARGE
BEFORE USE
The larger slot in the adapter must
be aligned with the larger slot in
the wall outlet to provide proper
polarity in the connection of the
power cord.
CAUTION: Attaching the adapter
ground terminal to wall outlet
cover screw does not ground the
appliance unless cover screw is
metal, and not insulated, and wall
outlet is grounded through house
wiring. You should have the circuit
checked by a qualified electrician
to make sure the outlet is properly
grounded.
When disconnecting the power
cord from the adapter, always
hold the adapter with one hand. If
this is not done, the adapter
ground terminal is very likely to
break with repeated use.
Should the adapter ground
terminal break, DO NOT USE the
appliance until a proper ground
has again been established.
USE OF EXTENSION CORDS
Because of potential safety
hazards under certain conditions,
we strongly recommend against
the use of an extension cord.
However, if you still elect to use
an extension cord, it is absolutely
necessary that it be a
3-wire grounding type appliance
extension cord and that the current
carrying rating of the cord in
amperes be equal to or greater than
the branch circuit size shown on the
rating nameplate of the appliance.
6
