background image

YOUR GE ROOM AIR CONDITIONER

1

WARRANTY

Save proof of original purchase date such as your sales slip or 

 check to establish warranty period.

WHAT IS COVERED

FULL ONE-YEAR WARRANTY

For one year from date of original

purchase, we will provide, free of
charge, parts and 

 labor in

your home to repair or replace

any part of the room 

 that fails because

of a manufacturing defect.

FULL-FIVE YEAR WARRANTY

For five years from the date of

original purchase, we will provide,
free of charge, parts and service
labor in your home to repair or

replace 

any part of the sealed

refrigerating system 

(the

compressor, condenser,
evaporator and all connecting
tubing) that fails because of a
manufacturing defect.

For each of the above warranties:

Transportation expense to and from

 shop and shop service

labor if required will be free of
charge.

This warranty is extended to
the original purchaser and any
succeeding  owner for products
purchased for use in the 48
mainland states, Hawaii and
Washington, 

 In Alaska the

warranty is the same except that it

is LIMITED because you must pay

to ship the product to the service
shop or for the service technician’s
travel costs to your home.

All warranty service will be
provided by our Factory Service
Centers or by our authorized
Customer Care

(

servicers during

normal working hours.

Should your appliance need
service, during warranty period
or beyond, call 800-GE-CARES
(800-432-2737).

I

WHAT IS NOT COVERED

● 

Improper installation

● 

Failure of the product resulting

I

● 

Service trips to your home to

If you have an installation

from modifications to the product or

teach you how to use the product.

problem, or if the air conditioner is

due to unreasonable use including

Read your Use and Care material.

of improper cooling capacity for the

failure to provide reasonable and

If you then have any questions

intended use, contact  your dealer

necessary maintenance.

about operating the product,

or installer. You are responsible for

● 

Failure due to corrosion on

I

please contact your dealer or our

providing adequate electrical

models not corrosion-protected.

Consumer Affairs office at the

connecting facilities.

● 

Damage to product caused

address below, or call, toll free:

● 

Replacement of house fuses or

by improper power supply voltage,

GE Answer Center’

)

resetting of circuit breakers.

accident, fire, floods or acts of God.

800.626.2000

● 

In commercial locations labor

WARRANTOR IS  NOT

consumer information service

necessary to move the unit to a

RESPONSIBLE FOR

location where it is accessible for

CONSEQUENTIAL DAMAGES.

service by an individual technician.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which 

 from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: General Electric Company

If further help is needed concerning this warranty, write:

Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225

 No. 

23-11 -1127 N-001

Pub 

 49-7267

 8

 

Summary of Contents for AVV18













Reviews: